Equipment

Aspen Machining has a large selection of both manual and CNC machine tools to meet the needs of today’s competitive market and customers’ demanding requirements. Our full service machining capabilities includes CNC and Conventional Milling, Turning, Grinding, Wire and Die Sink EDM. Utilization of modern scheduling and CAD/CAM software makes it possible for our staff to produce the highest quality of parts while maintaining the highest level of efficiency and conformability. Our blend of “old school” techniques and “cutting edge” technology make for an extremely effective combination.

5-Axis Mills

DMG MORI-SEIKI HSC 105

DMG MORI-SEIKI HSC 105

43.7″ x 31.5″ x 23.6″ travels, 37″ Diameter Table, Linear motor, 2g acceleration and feed and rapid traverses of up to 3,543 ipm, 30 HSK63 Tools, 18,000 RPM, Thru Spindle Coolant, Renishaw Probing System, Blum Tool Measurement

Qty2 DMG MORI-SEIKI DMU65

28.9″ x 25.6″ x 22″ travels, 31.5” x 25.6” Table, 60 HSK63 Tools, 20,000 RPM, Thru Spindle Coolant, Renishaw Probing System, Blum Tool Measurement

HERMLE C 400

33.4″ x 27.5″ x 19.7″ travels, 25.6” x 19.7” Table, 38 HSK63 Tools, 18,000 RPM, Thru Spindle Coolant, Renishaw Probing System, Blum Tool Measurement

3-Axis Mills

aspen-equipment-2

Qty 2 – Makino S56 VMC

36″x 20″x 18″, 30 Position Tool Changer, 13,000 RPM, Thru Spindle Coolant

HAAS VF-7/50 50

HAAS VF-7/50 50

84″x32″x30″, 4th Axis, 30 Position Tool Changer, Thru Spindle Coolant, CAT 50 Tooling

HAAS VM-2 CNC VMC

HAAS VM-2 CNC VMC

30″ X-axis, 20″ Y-axis, 20″ Z-axis, with a TR 210 5th-axis and a 24 Position Tool Changer, 12,000 RPM, 30 HP Direct Drive Spindle, Thru Spindle Coolant

HAAS VF-2 Super Speed VMC

Qty. 2 – HAAS VF-2 Super Speed VMC

30″ X-axis, 16″ Y-axis, 20″ Z-axis, with a HRT 210 4th-axis and a 24 Position Tool Changer, 12,000 RPM, 30 HP Direct Drive Spindle

HAAS Super Mini Mills

HAAS Super Mini Mill

16 ” X-axis, 12″ Y-axis, 10″ Z-axis, 10,000 RPM Spindles

CNC-Lathes

Mori Seiki NL2500Y/1250

Mori Seiki NL2500Y/1250

20″ x 51″ Turning Capacity 6000 RPM Live Tooling, 4″ Y axis travel, 10″ Chuck, 3.6″ Through Spindle Hole, 12 Position Turret, Tool Setters

Mori Seiki NLX2500SY/750

Mori Seiki NLX2500SY/750

20″ x 29.5″ Turning Capacity,” Built In Motor Turret” 10,000 RPM Live Tooling, 4″ Y axis travel, 10″ Chuck, 3.6″ Through Spindle Hole, 12 Position Turret, Tool Setters

Mori Seiki NL2000SY/500

Mori Seiki NL2000SY/500

10″ x 23″ Turning Capacity,” Built In Motor Turret” 6,000 RPM Live Tooling, 4″ Y axis travel, 8″ Chuck, 2.9″ Through Spindle Hole, 12 Position Turret, Tool Setters

HAAS TL-2

HAAS TL-2

16″ Swing, 48″ between centers, 11″ over cross slide

Manual Equipment

Sharp Model HMV with ProtoTrak 2-axis CNC Control

30″ X-axis, 12″ Y-axis, 16″ Z-axis

Monarch 10EE Toolroom Lathe

Monarch 10EE Toolroom Lathe

10″ Swing, 20″ Between Centers, 8″ 6 Jaw Buck Chuck

Surface Grinders

Okamoto 820 DX Automatic Surface Grinder

Okamoto 1624 DX Automatic Surface Grinder

16″ x 24″ Magnet

Okamoto 820 DX Automatic Surface Grinder

Okamoto 820 DX Automatic Surface Grinder

8″ x 20″ Magnet

Okamoto 1224 ST Automatic Surface Grinder

Okamoto 1224 ST Automatic Surface Grinder

12″ x 24″ Magnet

Okamoto 618 Surface Grinders

(2) Okamoto 618 Surface Grinders

With coolant

Harig 6″ x 18″

Set-up for Graphite

I.D./O.D. Cylindrical Grinder

BrownandSharpeNo1

Brown & Sharp No. 1

10″ x 20″, 10″ Wheel

Brown & Sharp No. 5

8″ x 16″, 7″ Wheel

Rotary Surface Grinder

Blanchard No. 18

Blanchard No. 18

36″ Table, 18″ Wheel

Sinker EDMs

Agie Charmilles GF Form 20

Agie Charmilles GF Form 20

80 Amp, 13.7″ x 9.8″ x 9.8” Travels C-Axis

Eltee Pulsitron Model EP

30 Amp, 14″ x 8″ Travels

Wire EDM

Agie Progress VP2 Wire EDM with Gaiser EDM Tooling-2

Agie Progress VP2 Wire EDM with Gaiser EDM Tooling

250 x 350 x 250mm Work Envelope, 4 Axis

 

Capable of producing 4Ra finish on Carbide

Agie Classic 3S Wire EDM with Gaiser EDM Tooling

Agie Classic 3S Wire EDM with Gaiser EDM Tooling

500 x 350 x425mm Work Envelope, 4 Axis

 

Capable of machining 16.7″ thick work piece

agie-classic-2s

Agie Classic 2S Wire EDM with Gaiser EDM Tooling

250 x 350 x 250mm Work Envelope, 4 Axis

Honing

Sunnen MBB-1600MS Hone

.060″ – 3.0″ 

Get In Touch
Our Address

1210 Commerce Ct. Lafayette, CO 80026, USA

Phone: 303.604.2186

Fax: 303.604.2035 

Email: sales@aspenmachining.com